12 Volt LED Light Strips

Inexpensive 12 Volt LED light in DIY

Published On August 2, 2017 | By ayut | Light Bulbs, Lighting Ideas

As an efficient light 12 Volt LED light of course people always use this bulb. Because it is very popular, so the cost of this light is expensive to be bought. But you do not be worried because there are some instructions for you to make a 12 volt LED light in DIY experience.

12 Volt LED Light Strips

12 Volt LED Light Strips

As an efficient light 12 Volt LED light of course people always use this bulb. Because it is very popular, so the cost of this light is expensive to be bought. But you do not be worried because there are some instructions for you to make a 12 volt LED light in DIY experience.

13 Photos Gallery of: Inexpensive 12 Volt LED light in DIY

Image of: Led Light Outdoor Fixture Images Home Fixtures Decoration Ideas Intended For 12 Volt Led Light Decor Inexpensive 12 Volt Led Light In Diy

Image of: 36mm Square 12v Digital Rgb Led Pixels Strand Of 20 Ws2801 Id Pertaining To 12 Volt Led Light Diy Inexpensive 12 Volt Led Light In Diy

Image of: Cheap 12 Volt Led Lights Gold Coast Led Lighting 12 Volt Led Throughout 12 Volt Led Light Design Inexpensive 12 Volt Led Light In Diy

Image of: Red 12 Volt Led Light Bulbs

Image of: 12 Volt Led Light Manufacturers

Image of: LED Lights For RV Interior 12 Volt

Image of: Automotive LED Lighting

Image of: 12 Volt LED Lights For RV

Image of: 12 Volt LED Bulbs DIY

Image of: 12 Volt LED Light Strips For Boats

Image of: LED 12 Volt Lights For Camp Trailers

Image of: 12 Volt LED Light Strips

Image of: 12 Volt LED Rope Lights For Boats

There are some steps to be followed to make the inexpensive 12 volt LED light, prepare the tools such as 8 1.5 volt LED lights, AWG 18-gauge wire, Knife, Wire strippers, Electrical tape, 12 volt battery. Do the instruction in gently.

  1. Use knife to cut the AWG 18-gauge about 2 inches, 4 inches then connect them 12 volt battery LED light.
  2. Strips the nine strips into ¼ inches then use wire cutters to open the inner metal core that will be used to connect to the LED and 12 volt battery.
  3. Now attach the 18 inch wire on the end side strips with the terminal on LED light.
  4. Attach one of 4 inch strips wire to the terminal use a thin wire to do it. Then attach 4 inch strips in opposite of wire to the next LED light.
  5. Keep to repeat the process attaching the short strips of wire to the terminal to LED lights until you find the last short strips to connect to the last LED.
  6. Now use the end of 18 inch strip of wire to the last LED light. Attach the opposite end of the terminal to 12-volt battery.
Related  T5 Fluorescent Light Fixtures Ideas

Now you will have 12 Volt LED light as your handmade in DIY experience. It will be better for you to try make this light by yourself. It functions to help you in thrift way to save your money. Please leave a comment on this post and share with your friends.

Comments are closed.